Damper - Crankshaft: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Serpentine Accessory Drive Belt

Courtesy of DAIMLERCHRYSLER CORP.

1 - DRIVE BELT TENSIONER

2 - POWER STEERING PULLEY

3 - AIR CONDITIONING COMPRESSOR

4 - CRANKSHAFT DAMPER

5 - GENERATOR

6 - DRIVE BELT

Disconnect negative battery cable.
Remove the accessory drive belt. (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELTS - REMOVAL) .
Raise vehicle on hoist.

Fig 2: Crankshaft Damper - Removal
Courtesy of DAIMLERCHRYSLER CORP.

1 - SPECIAL TOOL 1023 PULLER

2 - SPECIAL TOOL 9020-R INSERT
Remove crankshaft damper bolt.
Use 1023 puller and insert 9020-R, remove crankshaft damper. See Fig 2