LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (3.5L Engine (Service Information)) >> Cooler-Engine Oil >> Removal

Cooler-Engine Oil: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Oil Cooler and Hoses
GC0015439Courtesy of DAIMLERCHRYSLER CORP.
1 - OIL COOLER
2 - COOLANT HOSES
3 - OIL FILTER
  1. Drain cooling system. (Refer to STANDARD PROCEDURE .
  2. Raise vehicle on hoist.
  3. Disconnect coolant hoses (2) from oil cooler (1). See Fig 1.
  4. Remove oil filter (3).
  5. Remove oil cooler attaching fastener from center of oil cooler (1).
  6. Remove oil cooler (1). See Fig 1.
scientia non olet · About LEMON Manuals