Connecting Rod Side Clearance
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Mount a dial indicator to a stationary point on engine. Locate probe perpendicular to and resting against the connecting rod cap being checked. Move connecting rod all the way to rear of its travel. Zero the dial indicator. Move connecting rod forward to limit of travel and read the dial indicator. See Fig 1. Compare measurement to specification listed in engine specifications. (Refer to ENGINE - SPECIFICATIONS) . Repeat procedure for each connecting rod. Turn crankshaft for connecting rod accessibility.