LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 159 (Engine & Automatic Transmission Cooling System) >> Engine >> Sensor-Engine Coolant Temp >> Installation >> Installation-1.6L

Sensor-Engine Coolant Temp: Installation: Installation-1.6L

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Coolant Temperature Sensor
GC0021809Courtesy of CHRYSLER LLC
1 - ENGINE COOLANT TEMPERATURE SENSOR
  1. Install engine coolant temperature sensor (1). Tighten sensor to 17 N.m (150 in. lbs.).
  2. Reconnect coolant temperature sensor connector.
  3. Install battery.
  4. Connect positive battery cable.
  5. Connect negative battery cable.
  6. Fill cooling system, refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals