LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 159 (Engine & Automatic Transmission Cooling System) >> Engine >> DRAINCOCK-Radiator >> Removal >> Removal (VALEO)

Removal (VALEO)

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Draincock
GC0021816Courtesy of CHRYSLER LLC
1 - RADIATOR TANK
2 - DRAINCOCK
CAUTION: Use of pliers on draincock is not recommended. Damage may occur to radiator or draincock.
NOTE: It is not necessary to remove draincock during a routine coolant drain.
  1. Drain the cooling system, refer to STANDARD PROCEDURE .
  2. Open the draincock by turning it counterclockwise until it stops.
  3. Turn the draincock back (clockwise) 1/8 turn.
  4. Pull the draincock (2) from the radiator tank.