Removal-Diesel Engine
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - RETURN HOSE |
| 2 - HOSE |
| 3 - COOLANT CONTAINER |
- Partially drain cooling system using the draincock only. See STANDARD PROCEDURE . Drain system below level of the coolant recovery pressure container.
- Disconnect return hose (1) at coolant recovery pressure container (3).
- Remove coolant recovery pressure container bolt.
- Lift container up at disconnect coolant hose (2) from bottom of coolant container.
- Remove coolant recovery container from engine compartment.