LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 159 (Engine & Automatic Transmission Cooling System) >> Engine >> Container-Coolant Recovery >> Removal >> Removal-2.0/2.4L >> Non - Turbo

Non - Turbo

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overflow Hose Routing
GC0021841Courtesy of CHRYSLER LLC
1 - PRESSURE CAP
2 - OVERFLOW HOSE
3 - COOLANT RECOVERY CONTAINER
  1. Disconnect overflow hose (2) from coolant outlet connector.
  2. Remove vent hose clip from stud on dash panel.
  3. Disconnect the MAP sensor connector.
    Fig 2: Coolant Recovery Container
    GC0021805Courtesy of CHRYSLER LLC
    1 - COOLANT RECOVERY CONTAINER
    2 - VENT HOSE
    3 - CLIP
    4 - SCREW
    5 - NUT
  4. Remove fasteners securing power steering fluid reservoir bracket to engine. Reposition reservoir.
  5. Remove coolant recovery container (1) attaching fasteners.
  6. Remove coolant recovery container.
scientia non olet · About LEMON Manuals