Container-Coolant Recovery: Installation: Installation-2.0/2.4L: Turbo

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Coolant Recovery Container - 2.4L Turbo

Courtesy of CHRYSLER LLC

1 - NUT

2 - SCREW

3 - COOLANT RECOVERY CONTAINER

Install coolant recovery container (3) and tighten fasteners to 4 N.m (35 in. lbs).

Fig 2: Overflow Hose Routing - 2.4L Turbo
Courtesy of CHRYSLER LLC

1 - OVERFLOW HOSE

2 - COOLANT OUTLET CONNECTOR
Connect throttle and speed control cables to throttle body.
Install throttle cable shield to throttle body.
Connect overflow hose (1) to coolant outlet connector.
Fill container to proper level.