Container-Coolant Recovery: Installation: Installation-1.6L
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of CHRYSLER LLC
| 1 - NUT |
| 2 - COOLANT RECOVERY CONTAINER |
| 3 - SCREW |
| 4 - VENT HOSE |
| 5 - OVERFLOW HOSE |
| 6 - CLIP |
- Engage coolant recovery container into washer fluid reservoir.
- Install coolant recovery container mounting screw (3) and tighten to 4 N.m (35 in. lbs.).
Courtesy of CHRYSLER LLC
| 1 - RADIATOR NECK |
| 2 - OVERFLOW HOSE |
- Connect hose (2) at upper radiator Tee.
- Fill coolant recovery container to proper level.