Removal-1.6L SOHC

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Accessory Drive Belt - Without A/C

Courtesy of CHRYSLER LLC

1 - ACCESSORY DRIVE BELT TENSIONER

2 - ACCESSORY DRIVE BELT

Disconnect negative battery cable.

Insert a 1/2" drive breaker bar into the square opening of the accessory drive belt tensioner (1).

Fig 2: Accessory Drive Belt - with A/C

Courtesy of CHRYSLER LLC

1 - ACCESSORY DRIVE BELT TENSIONER

2 - ACCESSORY DRIVE BELT

3 - IDLER PULLEY

Rotate accessory drive belt tensioner (1) counterclockwise until accessory drive belt (2) can be removed from pulleys. Remove accessory drive belt (2).