Slave Cylinder - Diesel And Turbo

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: To prevent drainage of clutch master cylinder assembly upon slave cylinder removal, it is necessary to make sure brake master cylinder fluid level is full and reservoir cap is installed tight.

Fig 1: Removing/Installing Concentric Slave Cylinder (CSC)

Courtesy of CHRYSLER LLC

1 - CONCENTRIC SLAVE CYLINDER

Remove transaxle from vehicle. Refer to REMOVAL .
Remove four (4) slave cylinder-to-clutch bellhousing bolts and remove slave cylinder (1) from transaxle. See Fig 1.