Clutch Hydraulic System: Notes
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - BRAKE MASTER CYLINDER RESERVOIR |
| 2 - CLUTCH MASTER CYLINDER |
| 3 - PEDAL ASSEMBLY |
| 4 - ADJUSTMENT SCREW |
| 5 - SLAVE CYLINDER |
The typical clutch hydraulic system consists of a clutch master cylinder (2), slave cylinder (5) and an interconnecting fluid line. Clutch hydraulic fluid is supplied by the brake system via the brake master cylinder reservoir (1). LHD models have an adjustable pedal pushrod (4). See Fig 1.
| 1 - BRAKE MASTER CYLINDER RESERVOIR |
| 2 - CLUTCH MASTER CYLINDER |
| 3 - PEDAL ASSEMBLY |
| 4 - SLAVE CYLINDER |
The typical clutch hydraulic system consists of a clutch master cylinder (2), slave cylinder (4) and an interconnecting fluid line. Clutch hydraulic fluid is supplied by the brake system via the brake master cylinder reservoir (1). LHD models have an adjustable pedal pushrod. See Fig 2.