LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (2.7L Engine (Service Information)) >> Valves & Seats-Intake/Exhaust >> Inspection >> Valves

Valves & Seats-Intake/Exhaust: Inspection: Valves

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Intake and Exhaust Valves
GC0015304Courtesy of DAIMLERCHRYSLER CORP.
  1. Clean and inspect valves thoroughly. Replace burned, warped and cracked valves.
  2. Inspect retainer lock grooves for wear or damage (2).
  3. Inspect valve face (4) for wear and pitting.
  4. Measure valve stems (3) and margins (5) for wear. For valve specifications, (Refer to ENGINE - SPECIFICATIONS) .
NOTE: Valve stems (3) are chrome plated and should not be polished.
scientia non olet · About LEMON Manuals