Valves & Seats-Intake/Exhaust: Description
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
The valves (5)&(6) are made of heat resistant steel, and have chrome plated stems to prevent scuffing. The four valves per cylinder (two intake (6) and two exhaust (5)) are actuated by roller rocker arms, which pivot on stationary lash adjusters. All valves use three bead lock keepers (1) to retain springs (3) and to promote valve rotation.