LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (2.7L Engine (Service Information)) >> Seals-Valve Stem >> Installation

Seals-Valve Stem: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Valve Seal And Spring Seat Assembly
GC0015307Courtesy of DAIMLERCHRYSLER CORP.
  1. The valve stem seal/valve spring seat (4) should be pushed firmly and squarely over the valve guide using the valve stem (5) as guide. Do Not Force  seal against top of guide.
  2. Install valve spring (3) (Refer to ENGINE/CYLINDER HEAD/VALVE SPRINGS - INSTALLATION) .
scientia non olet · About LEMON Manuals