Section 15 (2.7L Engine (Service Information)): Pump-Oil: Assembly

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Oil Pump

Courtesy of DAIMLERCHRYSLER CORP.

Assemble pump using new parts as required.
Tighten cover screws (2) to 12 N.m (105 in. lbs.).
Prime oil pump before installation by filling rotor cavity with engine oil.