LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (2.7L Engine (Service Information)) >> Plate-Flex >> Installation

Section 15 (2.7L Engine (Service Information)): Plate-Flex: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Attaching Bolts, Backing Plate And Flex Plate
GC0015329Courtesy of DAIMLERCHRYSLER CORP.
  1. Install flex plate (1) and backing plate (3).
  2. Apply MOPAR® Lock & Seal Adhesive to the flex plate bolts.
  3. Install all flex plate bolts (2) finger tight.
  4. Tighten flex plate bolts (2) to 95 N.m (70 ft. lbs.).
  5. Install transmission (Refer to INSTALLATION ).
scientia non olet · About LEMON Manuals