LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (2.7L Engine (Service Information)) >> Manifold-Intake >> Removal >> Removal - Intake Manifold Lower

Removal - Intake Manifold Lower

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Battery
GC0015222Courtesy of DAIMLERCHRYSLER CORP.
  1. Release fuel system pressure (Refer to FUEL SYSTEM/FUEL DELIVERY - STANDARD PROCEDURE) .
  2. Disconnect negative battery (1) cable located in trunk.
  3. Remove upper intake manifold (Refer to ENGINE/MANIFOLDS/INTAKE MANIFOLD - REMOVAL) .
    Fig 2: Injector Connectors
    GC0015235Courtesy of DAIMLERCHRYSLER CORP.
  4. Disconnect injector electrical connectors (2).
  5. Disconnect fuel supply hose (1) from fuel rail (Refer to FUEL SYSTEM/FUEL DELIVERY/FUEL LINES - STANDARD PROCEDURE) .
    Fig 3: Lower Intake Manifold Tightening Sequence
    GC0015375Courtesy of DAIMLERCHRYSLER CORP.
  6. Remove bolts attaching fuel rail (1 - 4).
  7. Remove fuel rail and injectors as an assembly.
  8. Remove manifold attaching bolts.
  9. Remove lower manifold.
  10. Inspect manifold (Refer to ENGINE/MANIFOLDS/INTAKE MANIFOLD - INSPECTION) .
scientia non olet · About LEMON Manuals