LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (2.7L Engine (Service Information)) >> Cooler & Lines-Oil >> Removal

Cooler & Lines-Oil: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Oil Cooler
GC0015353Courtesy of DAIMLERCHRYSLER CORP.
  1. Drain cooling system (Refer to COOLING - STANDARD PROCEDURE) .
  2. Raise vehicle on hoist.
  3. Disconnect coolant hoses (2) from oil cooler (4).
  4. Remove oil filter (3).
  5. Remove oil cooler attaching fastener from center of oil cooler (4).
  6. Remove oil cooler (4).
scientia non olet · About LEMON Manuals