LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (2.7L Engine (Service Information)) >> Chain And Sprockets-Timing >> Installation >> Crankshaft Sprocket

Crankshaft Sprocket

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Crankshaft Sprocket - Installation
GC0015390Courtesy of DAIMLERCHRYSLER CORP.
  1. Install crankshaft sprocket using Special Tools 6780-1 (1) and 8179 (2) until sprocket bottoms against crankshaft step flange. Use care not to rotate crankshaft.
    Fig 2: Crankshaft Sprocket Depth Measurement
    GC0015389Courtesy of DAIMLERCHRYSLER CORP.
  2. Verify that crankshaft sprocket is installed to proper depth by measuring from sprocket outer face to end of crankshaft. Measurement should read: 39.05 +/-0.50 mm (1.5374 +/-0.020 in.).
  3. Install primary timing chain (Refer to ENGINE/VALVE TIMING/TIMING BELT/CHAIN AND SPROCKETS - INSTALLATION) 
scientia non olet · About LEMON Manuals