LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Lighting Systems - Exterior (Service Information)) >> Tail Lamp >> Removal

Tail Lamp: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove screw attaching tail lamp assembly to the aperture panel. See Fig 1.
  2. Slide the lamp assembly down in the sheet metal opening.
  3. Remove the lamp assembly from vehicle.
  4. Remove bulb socket(s) from tail lamp housing.
  5. Pull bulb(s) from socket(s).
Fig 1: Tail And Stop Lamps
GC0022937Courtesy of DAIMLERCHRYSLER CORP.
1 - TAIL LAMP HOUSING
2 - WIRE CONNECTORS
3 - BOTTOM LOCATOR
scientia non olet · About LEMON Manuals