Tail Lamp: Installation
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Push bulb(s) into the bulb socket(s).
- Install bulb socket(s) into tail lamp assembly. Rotate the socket clockwise until fully seated.
- Test operation of lamps.
- Align the tail lamp assembly to the sheet metal opening.
- Insert the lower positioning tab into the slot and then rotate the lamp forward until the retaining clips snap into position.
- Slide the lamp assembly upwards within the opening.
- Install tail lamp attaching screw.