LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Lighting Systems - Exterior (Service Information)) >> Tail Lamp Unit >> Installation

Tail Lamp Unit: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the bulb sockets to the lamp assembly by rotating the sockets clockwise until fully seated.
  2. Test operation of lamps.
  3. Align the tail lamp assembly to the sheet metal opening.
  4. Insert the lower positioning tab on the lamp assembly into the matching slot and rotate the lamp forward until the retaining clips snap into position.
  5. Slide the assembly upwards within the sheet metal opening.
  6. Install the screw to hold tail lamp assembly to the aperture panel.
scientia non olet · About LEMON Manuals