LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Lighting Systems - Exterior (Service Information)) >> Park/Turn Signal Lamp >> Installation

Park/Turn Signal Lamp: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect wire connector to the back of front side marker/park/turn signal lamp.
  2. Install bulb into headlamp unit. See Figure
  3. Rotate socket clockwise one quarter turn.
  4. Test operation of lamps.
  5. Install headlamp access cover into splash shield.
scientia non olet · About LEMON Manuals