Interior Lighting
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Following are descriptions of the how the left multi-function switch is operated to control the many interior lighting functions and features it provides:
- Interior Lamps Defeat - The interior lamps defeat feature is requested when the left multi-function switch control sleeve is rotated to the interior lamps defeat detent position. The left multi-function switch sends an electronic switch status message over the LIN bus to the CCN, then over the CAN data bus to the other electronic modules in the vehicle.
- Interior Lamps On - The interior lamps on feature is requested when the left multi-function switch control sleeve is rotated to the interior lamps On detent position. The left multi-function switch sends an electronic switch status message over the LIN bus to the CCN, then over the CAN data bus to the other electronic modules in the vehicle.
- Panel Lamps Dimming - The panel lamps dimming function is active only when the left multi-function switch control knob is in any exterior lighting On position. With the exterior lighting On, the panel lamps dimming level is requested when the left multi-function switch control sleeve is rotated to any one of five minor detent positions. The left multi-function switch sends an electronic switch status message over the LIN bus to the CCN, then over the CAN data bus to the other electronic modules in the vehicle.
- Parade Mode - The parade or funeral mode is active only when the left multi-function switch control knob is in any exterior lighting On position. With the exterior lighting On, the parade mode is requested when the left multi-function switch control sleeve is rotated to the parade mode detent position. The left multi-function switch sends an electronic switch status message over the LIN bus to the CCN, then over the CAN data bus to the other electronic modules in the vehicle.