LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Lighting Systems - Exterior (Service Information)) >> Multi-Function Switch >> Installation

Multi-Function Switch: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the left multi-function switch in the slot in the back of the Steering Column Control Module (SCCM) (1) and connect the switch connector (3).
  2. Connect the instrument panel wiring harness connector to the back of the left multi-function switch.
  3. Align switch with the SCCM (2) and slide toward steering column.
  4. Install the screw (2) that secures the switch (3) to the SCCM (1).
  5. Install the upper and lower shrouds onto the steering column.
  6. Connect the battery negative cable.
scientia non olet · About LEMON Manuals