LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Lighting Systems - Exterior (Service Information)) >> License Plate Lamp Unit >> Removal

License Plate Lamp Unit: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove screws attaching license plate lamp to rear bumper. See Figure.
  2. Remove lamp from bumper.
  3. Disconnect wire connector and bulb.
scientia non olet · About LEMON Manuals