LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Lighting Systems - Exterior (Service Information)) >> License Plate Lamp Unit >> Installation

License Plate Lamp Unit: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect wire connector and bulb. See Figure.
  2. Place lamp in position.
  3. Install screws attaching license plate lamp to rear bumper.
scientia non olet · About LEMON Manuals