LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Lighting Systems - Exterior (Service Information)) >> Headlamp >> Installation

Section 148 (Lighting Systems - Exterior (Service Information)): Headlamp: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.
  1. Connect wire connector to the back of headlamp high or low beam bulb.
  2. Install bulb into headlamp housing. See Figure
  3. Rotate socket clockwise one quarter turn.
  4. Test operation of lamps.
  5. Install headlamp access cover into splash shield. See Figure.
scientia non olet · About LEMON Manuals