LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Lighting Systems - Exterior (Service Information)) >> Headlamp Leveling Motor (Export) >> Removal

Headlamp Leveling Motor (Export): Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove headlamp unit. Refer to REMOVAL .
  2. Disconnect headlamp leveling motor electrical connector.
  3. Rotate leveling motor one quarter turn counterclockwise. This will free leveling motor housing from the headlamp unit.
  4. Pull leveling motor straight from headlamp unit. Significant force will be required to unsnap motor control arm from lens reflector.
    5. NOTE: The headlamp leveling motor control arm is snapped into the lens reflector mechanism very securely. Use a firm, steady pull to disengage motor arm from reflector.
  5. Remove leveling motor from headlamp unit.
scientia non olet · About LEMON Manuals