LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Lighting Systems - Exterior (Service Information)) >> Front Position Lamp - Export >> Removal

Front Position Lamp - Export: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Working in the appropriate wheel well, open the lamp bulb access door located in the front portion of the front wheel well splash (2) shield. See Figure.
  2. Grasp the front position lamp socket extension and pull straight out of headlamp unit.
  3. Pull bulb straight from its socket.
scientia non olet · About LEMON Manuals