LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Lighting Systems - Exterior (Service Information)) >> Fog Lamp >> Installation

Fog Lamp: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.
  1. Install bulb (1) into lamp unit and latch it by turning clockwise until it reaches its detent position.
  2. Connect lamp electrical connector (2) to the fog lamp (1).
  3. Install splash shield (2) and attaching fasteners.
scientia non olet · About LEMON Manuals