LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Lighting Systems - Exterior (Service Information)) >> Fog Lamp Unit >> Removal

Fog Lamp Unit: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove fasteners attaching lower splash shield (2) to gain access to the rear of the fog lamp. See Figure.
  2. Disconnect wire connector (2) from fog lamp unit (1). See Figure.
  3. Remove four screws (1) attaching fog lamp unit to fascia. See Fig 1.
  4. Remove lamp unit from fascia.
    Fig 1: Fog Lamp Unit Attached To Fascia
    G00229340Courtesy of DAIMLERCHRYSLER CORP.