LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Lighting Systems - Exterior (Service Information)) >> Fog Lamp Unit >> Installation

Fog Lamp Unit: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.
  1. Place fog lamp unit into position.
  2. Install the four screws (1) attaching fog lamp unit to fascia. See Figure.
  3. Connect wire connector (2) to the fog lamp unit (1). See Figure.
  4. Install lower splash shield (2). See Figure.
scientia non olet · About LEMON Manuals