Center High Mounted Stop Lamp Unit: Removal
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Open liftgate.
- Remove liftgate CHMSL cover. See Figure.
- Disconnect the wire harness from the CHMSL.
- Remove screws attaching the CHMSL unit. See Fig 1.
Courtesy of DAIMLERCHRYSLER CORP.
| 1 - CHMSL LAMP |
| 2 - LIFTGATE |
- Remove the CHMSL unit from vehicle.