LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Lighting Systems - Exterior (Service Information)) >> Center High Mounted Stop Lamp Unit - Pt27 >> Removal

Center High Mounted Stop Lamp Unit - Pt27: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open hood.
  2. Disconnect and isolate the battery negative cable.
  3. Open decklid.
  4. Remove the decklid trim panel. Refer to REMOVAL
  5. Disconnect the Center High Mounted Stop Lamp (CHMSL) Unit electrical connector. See Fig 1.
    Fig 1: CHMSL Unit Electrical Connector
    GC0022919Courtesy of DAIMLERCHRYSLER CORP.
    1 - CHMSL UNIT ELECTRICAL CONNECTOR
  6. Remove the two retaining nuts to the CHMSL Unit. See Fig 2.
    Fig 2: CHMSL Unit Location
    GC0022920Courtesy of DAIMLERCHRYSLER CORP.
    1 - CHMSL UNIT
    2 - CHMSL UNIT RETAINING NUTS (2)
  7. Remove CHMSL Unit from decklid.
scientia non olet · About LEMON Manuals