LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Lighting Systems - Exterior (Service Information)) >> Back-Up Lamp >> Removal

Back-Up Lamp: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a fiber stick or equivalent, pry out on the outboard side of the lamp unit (2) at the fascia gap.
  2. Remove lamp assembly.
  3. Remove socket from housing.
  4. Disconnect the electrical connector (1) and twisting counterclockwise, pull bulb from lamp unit (2).
Fig 1: Back-Up Lamp Unit
G00232021Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals