LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Lighting Systems - Exterior (Service Information)) >> Back-Up Lamp Unit >> Removal

Back-Up Lamp Unit: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a fiber stick or equivalent, pry out on the outboard side of the lamp unit (2) at the fascia gap.
  2. Remove back up lamp assembly (2).
  3. Remove the bulb from the lamp housing (2) by rotating it counterclockwise until the bulb socket is free of the housing (2).
scientia non olet · About LEMON Manuals