LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Lighting Systems - Exterior (Service Information)) >> Back-Up Lamp Unit >> Installation

Back-Up Lamp Unit: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the bulb into the lamp housing (2) by rotating the bulb clockwise until fully seated.
  2. Place back-up lamp unit (2) into position and firmly snap into place.
scientia non olet · About LEMON Manuals