LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Lighting Systems - Interior (Service Information)) >> Rear Cargo Lamp >> Removal

Rear Cargo Lamp: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open liftgate.
  2. Remove jack storage door from right rear quarter trim panel.
  3. Remove jack and tool bag.
  4. Place right hand on stem of cargo lamp unit and pull downward until lens separates from the lamp unit. See Fig 1.
    Fig 1: REAR CARGO LAMP
    GC0022943Courtesy of DAIMLERCHRYSLER CORP.
    1 - JACK STORAGE AREA
    2 - WIRE CONNECTOR
    3 - CARGO LAMP UNIT
    4 - BULB
    5 - LENS
  5. Pull cargo lamp unit through jack storage door opening to access bulb. See Fig 1.
  6. Disconnect wire connector from cargo lamp unit.
  7. Pull bulb from unit socket.
scientia non olet · About LEMON Manuals