LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Lighting Systems - Interior (Service Information)) >> Rear Cargo Lamp Unit >> Removal

Rear Cargo Lamp Unit: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open liftgate.
  2. Remove jack storage door from right rear quarter trim panel.
  3. Remove jack and tool bag.
  4. Place right hand on stem of cargo lamp unit and pull downward until lens separates from the cargo lamp unit. See Figure.
  5. Pull cargo lamp unit through jack storage door opening to access bulb.
  6. Disconnect wire connector from cargo lamp unit.
  7. Remove cargo lamp unit from vehicle.
scientia non olet · About LEMON Manuals