LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Lighting Systems - Interior (Service Information)) >> Rear Cargo Lamp Unit >> Installation

Rear Cargo Lamp Unit: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Snap lens onto lamp unit. See Figure.
  2. Move wire connector through lamp opening and connect wire connector to cargo lamp unit.
  3. Place cargo lamp unit into opening and apply hand pressure to seat lamp unit into rear quarter panel.
  4. Install jack and tool bag in the storage area.
  5. Install jack storage door to the right rear quarter trim panel.
  6. Close liftgate.
scientia non olet · About LEMON Manuals