LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Lighting Systems - Interior (Service Information)) >> Dome Lamp Unit >> Removal

Dome Lamp Unit: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert a trim stick between the dome lamp unit bezel and the headliner.
  2. Disconnect wire connector.
  3. Remove the dome lamp unit from vehicle.