Dome Lamp - Pt27: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Open hood.
Disconnect and isolate the battery negative cable.

Using a trim stick (special tool #C-4755) or equivalent, gently pry off the dome lamp cover from the sport bar. See Fig 1.

Fig 1: DOME LAMPS - REMOVE/INSTALL

Courtesy of DAIMLERCHRYSLER CORP.

1 - SPORT BAR CENTER MOULDING

2 - DOME LAMP ELECTRICAL CONNECTORS

3 - DOME LAMPS

4 - DOME LAMPS COVERS

Disconnect the dome lamp from the connector. See Fig 1.
Remove lamp from vehicle.