LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Lighting Systems - Interior (Service Information)) >> Dome Lamp - Pt27 >> Installation

Dome Lamp - Pt27: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove lamp from vehicle.
  2. Connect the dome lamp to the connector. See Figure.
  3. Position the dome lamp cover on the sport bar and firmly push on cover to snap into place. The lens must be orientated correctly for proper fit. See Figure.
  4. Connect the battery negative cable.
  5. Open hood.
  6. Verify vehicle and system operation.
scientia non olet · About LEMON Manuals