Sensor-Transmission Range: Description
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - SOLENOID/PRESSURE SWITCH ASSEMBLY |
| 2 - TRS |
| 3 - TRANSFER PLATE |
| 4 - SEPARATOR PLATE |
| 5 - VALVE BODY |
The Transmission Range Sensor (TRS) (2) is mounted to the top of the valve body inside the transmission and can only be serviced by removing the valve body assembly. The electrical connector extends through the transmission case. See Fig 1.
The Transmission Range Sensor (TRS) has four switch contacts that monitor shift lever position and send the information to the PCM.