LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (42RLE Automatic Transmission (Service Information)) >> Service Information >> Seal-Oil Pump >> Removal

Seal-Oil Pump: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission from the vehicle (Refer to TRANSMISSION/AUTOMATIC - 42RLE - REMOVAL) .
  2. Remove the torque converter from the transmission bellhousing.
  3. Use a screw mounted in a slide hammer to remove oil pump seal.
scientia non olet · About LEMON Manuals