Shift Pressure Shift Valve

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Shift Pressure Shift Valve Components

Courtesy of DAIMLERCHRYSLER CORP.

1 - 1-2/4-5 COMMAND VALVE

2 - DRIVING CLUTCH K1

3 - HOLDING CLUTCH B1

4 - 1-2/4-5 SHIFT PRESSURE SHIFT VALVE

Each shift group possesses one shift pressure shift valve (4). See Fig 1. The 1-2 / 4-5 and 2-3 shift pressure shift valves are installed in the shift valve housing; the 3-4 shift pressure shift valve is installed in the valve housing. It assigns the shift pressure (p-S) to the activating actuator and the overlap pressure (p-U) regulated by the overlap regulating valve to the deactivating actuator.