LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Nag1 Automatic Transmission (Service Information)) >> Service Information >> Seal-Torque Converter Hub >> Removal

Seal-Torque Converter Hub: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the torque converter. Refer to CONVERTER-TORQUE .
  2. Remove the torque converter hub seal with suitable screw and slide hammer.
scientia non olet · About LEMON Manuals