Service Information: Pump-Oil: Description
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - CRESCENT |
| 2 - OIL PUMP |
| 3 - EXTERNAL GEAR |
| 4 - INTERNAL GEAR |
| 5 - INLET CHAMBER |
| 6 - PRESSURE CHAMBER |
The oil pump (2) (crescent-type pump) is installed in the bellhousing behind the torque converter and is driven by the drive flange of the torque converter. The pump creates the oil pressure required for the hydraulic procedures. See Fig 1.